ProRestore ELECTRO-GEN Operator's Manual download pdf (Page 6)

• Fog produced is ammable. Do not fog near open ames such as

gas burners, or pilot lights.

• Insecticidal fogs may be toxic. Do not inhale fog.

• Do not fog around food, eating utensils, humans, pets, or animals.

• The odor of this product like many common household products with

an odor may irritate those who have allergic sensitivity.

• Cautions for the potentially sensitive: evacuate area prior to treat-

ment. Potentially sensitive individuals may re-occupy treated area when

they feel physically comfortable or upon advice of their physician.

• Use only 3 wire 10, 12, or 14- gauge electrical extension cord, suit-

able for outdoor use. Never remove or bypass grounding feature.

Failure to comply may result in electrical shock, re, or result in poor

treatment results.

CaUTIon!

• Follow chemical manufacturer's fogging instructions carefully.

•

Be careful to avoid damaging target surfaces when cold fogging/

wet spraying.

•

Prior to each use, examine both electrical extension cord and unit's

primary electrical cord for signs of damage or degradation. Do not

operate unit with damaged electrical cord.

•

Extinguish cigarettes and/or other ignition sources while lling or uti-

lizing fogger.

•

Never fog insecticides not labeled for thermal fogging.

eQUIPMenT PRePaRaTIon

Before each use be sure that nozzle cap is tightened securely and the

lter screen is in place on the pick-up tube. Ensure that the solution

reservoir is free of all debris before lling.

a. ColD foGGInG / sPRaYInG

For spraying with heating barrel removed, emulsiable concentrates or other

materials designed to be mixed with water may be used. Many oil/solvent

based formulations suitable for this type of spraying may also be used.

Your Electro-Gen easily converts to a cold fogger/sprayer by pulling

the vaporizing barrel straight out. Be sure that barrel is cool before

attempting removal.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

ProRestore ELECTRO-GEN Operator's Manual Page 6